Home3D Printing Helps This Star Wars TIE Fighter RC Quadcopter Patrol a Galaxy Far, Far Away

Share to Share on FacebookShare on Google+Tweet about this on Twitter

by Scott J Grunewald

3dp_tiefighter_drone_full-e1449307482917

With the seventh film only days away from rocketing into theaters, and probably leaving shattered box office records in its wake, Star Wars is likely on every nerd’s mind right now. Since Disney purchased the film series from its creator George Lucas a few years ago they have wasted little time in using their impressive merchandising apparatus to milk the property for everything that it’s worth. But even with stores selling everything from Stormtrooper clock radios to R2D2 trash cans, as well as every Star Wars toy that you can possibly imagine being available, there are always going to be some things that Star Wars fans will just need to make for themselves.

While he never gave a specific reason, why Imgur user Woodpiece would want a flying TIE Fighter quadcopter probably isn’t a hard question to answer. But thankfully he did provide an answer for exactly how he built his TIE Fighter quadcopter. Not only did he post a bunch of pictures of him assembling the quad, he also included an assembly tutorial. Although if anyone is looking to make one of these things for themselves, it looks like this wasn’t a project for beginners so they’ll probably need to know a little something about building quadcopters and drones.

3dp_tiefighter_drone_controller-e1449307663808

Woodpiece started his build by buying a First Order TIE Fighter toy from the new line of toys released for the upcoming Star Wars: The Force Awakensmovie. He disassembled the toy, removed or Dremeled anything that was unnecessary or weighted the toy down, and began customizing components from a tiny drone to fit inside of it. He started by cutting some slits in the TIE Fighter’s fins that would allow the mini rotors to spin and provide enough lift to get it off of the ground. Then he used a standard 250 quad setup and 3D printed the custom motor mounts so they would fit inside the wings and run directly into the center of the toy.

The hollowed out cockpit of the TIE Fighter is where all of the main quadcopter electronics and components fit, and he didn’t need to Dremel anything as there was plenty of space for it all to fit inside. The cockpit holds the flight controller, multiwii flip 1.5 from ready2flyquads.com, which sits snugly at the bottom with the motor controllers and the battery sitting on top of it. You can see from the picture of the inside of the cockpit that there was no room to spare, but Woodpiece managed to cram everything in.